XCMG Bulldozer TY320

XCMG Bulldozer TY320 1.strong power, reliable performance 2.convenient operation 3.hexahedron cab has wide view

 XCMG Bulldozer TY320

•It adopts Cummins NTA855-C360 inter-cooling, charged engine, featuring strong power and superior performance.

•The new hexahedron cab features beautiful appearance, wide view and good seal performance.

It adopts famous imported VDO monitoring system which is very sensitive highly reliable.

•The cab angle and height can be adjusted, and it has the ergonomically designed operation system at both sides, which makes it more comfortable to operate.

•The engine and control panel is flexible supported, which generates low noise and reduces driver fatigue.

•The independent ROPS device reinforces the operation safety.

•The wear parts made by military technologies and materials feature high strength, good toughness and high wear resistance

Engine
Model	CUMMINS NTA855-C360
Type	Turbocharging, inter-cooloing, vertical type
Cylinder quty.-bore×stroke	6-139.7×152.4mm
Piston displacement	14L
Rated power	235kW
Max.torque	1000N.m/1400rpm
Rated speed	2000rpm
Fuel consumption	242g/kW.h
Start motor	24V,11kW
Generator	28V,35A
Battery	24V(12 ×2)-195Ah×2
Drive System
Hydraulic torque converter	3 components, single-stage, single phase
Power shift transmission	Planetary gear, multi-disc clutch, hydraulic integrated forced lubrication
Main drive	Spiral bevel gear, splash lubrication
Steering clutch	Wet, multi-disc, spring-pressed, hydraulic release
Final drive	2-stage spur gear reduction, splash lubrication
Travel System
Suspension type	Semi-rigid, equalizing beam float type
Drive wheel	Insert block type, drive gear
Amt.of carrier wheel(each side)	2
Amt.of supporting wheel(each side)	7
Working Devices
Blade type	Straight tilt type/semi-U type
Width×Height	4130×1590/4030×1720 mm
Blade capacity	10.4/11.7
Scarifier type	3-grouser, 1-grouser
Max.blade tilt range	1000mm
Crawler
Type	Assembly type/ single-grouser
Grouser height	80mm
Amt.of track shoe	41×2
Track shoe width	560mm
Track center distance	228.6mm
	2140mm
Ground contact length	3150mm
Hyraulic system of working devices
Type	Gear type
Working pressure	13.7MPa
Rated flow	355(L/min)
Blade cylinder cylinder bore×stoke	Φ140×Φ 75× 1346(mm)
Blade tilting cylinder cylinder bore×shaft diameters×stroke	Φ225×Φ90×80(mm)
Scarifier hoisting cylinder: cylinder bore×shaft diameter×stroke	Φ225×Φ90×540(mm)
Scarifier adjusting cylinder: cylinder bore×Shaft diameter×stroke	Φ225×Φ90×500(mm)
Parameters
Bare machine weight	36700kg
Max.traction	300kN
Min.turning radius	3940mm
Max.gradeability	30
Min.ground clearance	500mm
Fuel tank volume	600L
Ground pressure	0.104MPa

XCMG Bulldozer TY320